#01 
Finishing by bottom cylinder, improving product quality
Generally, for the finishing of brake pad backing plate by traditional punching machine, it is necessary to install special hydraulic device.
For the structural design of our brake pad backing plate hydraulic press, there is a dedicated bottom cylinder for the finishing process. And it has the dual-purpose function of front and back finishing.
Our hydraulic system is equipped with a dedicated proportional pressure valve to adjust the floating blank holder force during finishing. This provides support by floating force.It will not affect the processed dimensions in the previous processes.Besides, the products produced by the brake pad backing plate hydraulic press can also meet the requirements of high-end brand auto parts.
In order to make the brake pad backing plate hydraulic press suitable for products that require a large leveling force, we have also designed dedicated back-finishing mould supporter. So that the large main cylinder presses it to be flat, and the bottom cylinder conducts back finishing. 
This finishing process can greatly improve the surface quality of product,and increase the production efficiency.

#02 

Small floor space, facilitating the installation of automated devices 
Conventional small countertop hydraulic press has a headache, i.e. occupying a large floor space.
Both the hydraulic system and the motor system are placed on ground. Therefore, there is little space for installing automated devices. It is much inconvenient for automated production.The less automation, the harder it is to recruit.
DEKUMA team has found that, as long as the hydraulic and electrical systems are designed reasonably, and the brake pad backing plate hydraulic press adopts top-mounted layout, both the hydraulic system and the electric control system are placed above the machine body, the floor space will be smaller, and there are no obstacles around. Automated devices can be installed on site as required.
Therefore, for DEKUMA hydraulic press,whether it is a single machine with automation or multi-machine linkage with automation,it will not be affected anymore.
Our customers, after actual production on site,have fed back that because the labor intensity is reduced, and the space utilization is increased, both the production managers and the employees, like our brake pad backing plate hydraulic press very much. We are delighted to receive such a high praise.

#03

Efficient production at a speed comparable to that of punching machine
Many customers are worried about that using hydraulic press instead of punching machine may affect the production efficiency. The production speed of our brake pad backing plate hydraulic press is much faster than that of ordinary one.
Our punching and nail pulling processes can be completed within 1.3-1.6s, and the finishing process can also be controlled within 1.7-2.3s, comparable to the production speed of traditional punching machine. If it is equipped with automated linkage production, it can even reach 13-15 pieces/min.
Some people will ask whether the oil temperature will be too high after the hydraulic press operates for a long time, and whether stuck valve will be caused.Don’t worry, our specially designed hydraulic system is equipped with a two-way cartridge valve.
Its maximum diameter can reach 25, which can reduce the resistance of hydraulic oil when flowing at high speed.Large diameter means less heat generated by extrusion. Coupled with a suitable oil cooler, it can also ensure the temperature of the hydraulic system, making the hydraulic press faster and quieter in production, and meeting the needs of 24-hour stable production.
Customers and friends who are still using punching machine may try to use Datong servo hydraulic press.